Dustless Hardwood Floor Refinishing NJ
Free Dustless Hardwood Floor Refinishing!
dustless hardwood floor refinishing! Some Times “ the hard wood floors you have been looking for ”
are already there! and the good news is, Huggins wood Floors offers dustless hardwood floor refinishing
at no additional charge!
Maybe you have discovered a once beautiful hardwood floor under some recently
removed carpets? or maybe you are moving into a home in which the floors have seen better days? Maybe
even your floors are in decent shape, but you just want to change the color?
Wood Floors we specialize in bringing those old tiered floors back to life! With dustless
hardwood floor refinishing, we can repairing and or refinishing your floors to better then new condition.
no need to replace good hardwood flooring because of dents, scratches, chips or discoloring.
Traditionally sanding and refinishing hardwood floors has been an extremely
dusty process, creating a mess in your home and clean up headaches that
feel like they never end. Not to worry! at Huggins Wood Floors we utilize
a state of the art dustless hardwood floor refinishing system,
which consists of powerful vacuums (either trailer mounted or exterior stand alone units)
located outside of your home. These powerful vacuums are connected all of our sanding
equipment and capture all Airborne dust generated during the sanding
and refinishing process.
Here is how dustless hardwood floor refinishing
Dustless hardwood floor refinishing in action!
We offer free, in-home estimates
and design consultations and complete a explanation of our dustless hardwood floor refinishing system.
Because the choices in colors, textures and styles are so numerous, by spending some time
with you and establishing your needs, tastes and style. We will then create a hardwood floor
that best suites you, your budget and your expectations. We look for any areas that need
to be repaired or replaced, water damage, dents and deep scratches that need extra attention during
the dustless hardwood floor refinishing process. Than We will provide an on-site assessment, address
any potential issues, answer all of your questions and walk you through our dustless hardwood
floor refinishing process.and provide you with a no obligation written price quote for refinishing
the floors in your home. Just call 908-232-6600
Below, we explain how a transformation
is made possible during our dustless hardwood floor refinishing process.
If you have carpet on your hardwood floors at this time,
the first step is to remove it. We provide complete carpet removal surface, including
the disposal of all related materials.
At this time,
all repairs, which often require the replacement of existing boards with undamaged,
reclaimed or new wood, occur before the sanding process.
To remove the floor finish, including any build up of wax
or dirt, we use coarse grit sandpaper, working up to a finer grit. Thoughtful sanding
will ensure the minimum amount of actual wood is removed from your floors.
The depth of the sanding will be influenced by the overall condition of the floor
including the existence of deep scratches, dents and stains.
Our dustless hardwood
floor refinishing system ensures dust, finish, dirt and wax is contained at
the sanding source before becoming airborne. Keeping your home clean and free
Buffing the entire hardwood
floor with an abrasive screen blends the remaining fine sanding marks to make them virtually
invisible to the unaided eye.
At this point,
if a stain has been selected, the staining process begins. To help choose the color that
best fits your style; we will install a medium size test area on your floor.
We maintain an inventory of all Minwax stain colors in our vans which allows
us to provide several color samples on your floor. You will know exactly what
the final outcome will be for the colors your may be considering – no trying
to guess off little stain charts or sample boards.
Your choice of either 3 coats of professional grade oil-based polyurethane or
4 coats of the best water-based polyurethane finish are applied over the course of
the next several days. Drying times will vary depending on your choice
of stain color, oil- or water-based polyurethane, and weather conditions.
each coat of finish, the floors will be buffed with an abrasive screen and the perimeter
of the floors hand-sanded in preparation for the next coat.
case, after we have refinished your floors, we will provide you with specific guidance
before you plan to move back your furniture. Given that area rugs cover larger sections
of floor, we recommend that they remain off the still-curing floors for 2-4
weeks. Huggins Wood Floors for more than 15 years. Discover the difference expert
advice and personalized services make by partnering with us
Dust-Free Sanding DCS…What and Why?
stands for Dust Containment Sanding. Why is it revolutionary? Not only does it save you time, it is
the healthiest available option for you, your family and even your pets. DCS eliminates airborne particles
which traditional sanding methods cannot. With DCS you will not have dust nestling in your air ducts or
lingering in your lungs. Particulate matter won’t mess up your home furnishings, or settle into
your new glossy coat of finish. It’s the safe and easy choice.
offers the most innovative DCS design. The Bona Atomic Trailer System is Bona‘s most powerful
dust containment system. It is trailer-mounted, and industrial size. It attaches to a gas powered engine outside
of the home, which significantly increases airflow and dust extraction.
Sanding – Yes, It Exists!
The days of hanging plastic, covering every
surface, and vacating your home for a dusty nightmare are over. Bona‘s innovative dust free sander,
the Bona Atomic DCS, connects a powerful vacuum motor to sanding equipment. The combination virtually
eliminates airborne dust generated while sanding. At the same time, Bona‘s Atomic Dust Containment
Systems are the most advanced and powerful dust containment systems in the world. They are capable of
reducing dust far beyond even what traditional sanding generates.
to Expect on the Job Before Sand & Refinish/ Initial finish?
begin, you should list your expectations and research your needs. Educate yourself on the process and
products you’d like to use. Once you know your expectations, needs and products, you will feel
comfortable and confident about the investment you are making, and you can begin getting quotes. The
cost of the job will vary, depending on the contractor’s expertise, quality of work, and the products
used. Some estimates are itemized, and some are comprehensive totals for the scope of the work. Just
remember that estimates are just that – ESTIMATES. Everything promised by the contractor should be included
in the final contract. Warranties and guarantees, work hours and project duration should also be discussed
and included. You should also ask your contractor for a portfolio, specification sheets or brochures
on products to be used. If someone in the home has chemical sensitivities, ask your contractor for a copy
of the MSDS (Material Safety Data Sheet) for all the products being used. Your physician can then advise
What to Expect on the Job During
delays are out there. If you can’t determine what products are currently on your floors, it could
lengthen the process. Also, temperature and relative humidity can affect your floors’ dry times.
The standard for a hardwood floor is at least three coats. This consists of one seal coat (which may be the stain)
and two coats of finish. Additional coats of finish may be applied depending on need. There is no need
to vacate your home. Bona systems have low-VOC’s, no harmful fumes and fast dry times. You will
be back on your floor in no time. Of course, Bona Systems are GREENGUARD certified for indoor air quality,
making them safe for your family and home. Bona’s systems are also safe for your pets. However,
it is a good idea to keep them off the floors until the finish is fully cured. This minimizes contamination,
and prevents dirt and hair from collecting in the polyurethane coating of your floor.
What to Expect on the Job After?
Bona Systems minimize
clean-up. Since sanding is dust-free, there is no time wasted hanging and removing plastic. A floor’s
finish is susceptible to scuffing and scratching until it is fully cured. Yet, your floor can typically
be walked on with stocking feet in just 3-4 hours. Furniture can be placed back on the floor (not dragged)
in 72 hours. Area rugs can be put down after one week – when the finish is fully cured. Maintenance
depends on the amount of traffic you have in your home. If you have children and pets, you will want
to clean more regularly. We recommend dusting your floors with a dust mop daily, or every other day.
You should also clean your floors regularly with a waterborne, non-toxic formula specifically formulated for
hardwood floors. The Bona Hardwood Floor Mop is an easy and effective tool to start with!
Choosing the Right Help
Selecting industry professionals
to assist you takes time and patience. Because every situation is different, it is vital to be well-informed
and do the necessary research. Find a contractor you are comfortable working with. Selecting the right
dealer for materials is also important. You should purchase your hardwood floor from a specialized dealer
who not only sells flooring but can also advise you on achieving your desired result according to your
budget, priorities, tastes and vision.
Industry First: Bona offers a complete
hardwood floor finishing and care system that is GREENGUARD Indoor Air Quality Certified. The certification
assures professionals and consumers unsurpassed durability, beauty and environmental responsibility for
Safe: Bona’s waterborne floor cleaners are safe for floors,
families, and the environment and GREENGUARD Children & Schools Certified. Bona’s specially-developed
non-toxic and biodegradable formula also limits the harmful effects of downstream pollution.
Breathe Easier: Bona waterborne finishes have no toxic fumes and low VOC’s so
they are healthier for your family, pets and the environment. Additionally, there is no need to vacate
your home during the finishing process due to fast dry times and easy water clean-up. Our Swedish waterborne
technology highlights the true beauty and elegance of the wood and provides the ultimate in durability.
It, too, is GREENGUARD certified.
No Dust!: Bona’s trailer-mounted Bona Atomic Dust Containment
System is the most forward thinking innovation in the industry and the world. The powerful system evacuates
airborne dust generated by the sanding process (no more plastic on the furniture!). Not only is it GREENGUARD
Indoor Air Quality Certified, but it also virtually eliminates lingering dust in your air-ducts.